| Symbols & Numeric |
| 12.5s |
| 1-2s |
| 1-3.5s |
| 1-3s |
| 1-4s |
| 1-5s |
| 2 of 3-2s |
| 2-2s |
| 3-1s and 4-1s |
| 7-T |
| A |
| A |
| accuracy |
| Action Log Messages |
| Actions |
| Actions and Comments |
| Actions and Comments |
| Actions and Comments by Instrument |
| Activate Automatic Monthly Transmission |
| Activate Transmission for InstantQC™ |
| active rule |
| Add a Bio-Rad Lot |
| Add a Lab Number |
| Add a User |
| Add and Update Lab Numbers |
| Add Non-Bio-Rad Lots |
| Add Tests |
| Add Tests Manually |
| Add Tests Using Instrument Setup |
| Add Tests with a Code of “Other” |
| Add Tests With Instrument Setup |
| Add, Edit, and Delete Actions in the Data Entry Dialog Boxes |
| Adding a Comment by Instrument |
| Adding a Comment to a Row of Data |
| Adding an Action and Comment by Instrument |
| Adding an Action by Instrument |
| Additional Lab Numbers |
| Administration/Setup Permissions |
| Affiliated Data Exception Report |
| Affiliated Data Exception Report |
| affiliated group |
| Affiliated Lab Numbers |
| Affiliated Laboratory Comparison Report |
| Affiliated Laboratory Comparison Report |
| Affiliated Laboratory Comparison Report: Abbreviated Summary |
| Affiliated Laboratory Comparison Report: Abbreviated Summary |
| Affiliated Reports |
| Affiliated Reports |
| all labs group |
| analyte |
| analytical process |
| Apply QC Rules |
| Apply Rules |
| Apply Rules with Westgard Advisor™ online |
| Arrange and Sort Lots |
| audit trail |
| Audit Trail Events |
| Audit Trail Events |
| Audit Trail Report |
| Automatic Action Logs |
| B |
| B |
| Bar Chart |
| Basic QC Statistics |
| Bench Review |
| Bias |
| Bias |
| Bias and Imprecision Histogram Report |
| Bias and Imprecision Histogram Report |
| Buttons |
| C |
| C |
| Calculating a Control Mean and Range |
| CAP Accreditation Requirements |
| Change a Data Point's Accepted/Rejected Status |
| Change a Password |
| Change Data |
| Change the Accepted/Rejected Status |
| Change the Current Data Option |
| Change the Date and Time for a Row of Data |
| Change the VITROS® Slide Generation Number |
| Chart Header Options |
| Check Boxes |
| Chemistry Section |
| Choose and Troubleshoot a QC Procedure |
| Choose Goals Based on Required Quality |
| CLIA |
| CLIA Requirements |
| CLIA Requirements |
| Close a Lab Number |
| Close a Lot |
| Close a Test |
| Close and Open Lots |
| Close and Open Tests |
| CLSI |
| Coefficient of Variation (CV) |
| Coefficient of Variation Ratio (CVR) |
| Command Buttons and Options |
| Comments |
| Communicate with Unity™ Interlab |
| Comprehensive Reports |
| Comprehensive Reports |
| Condense Data |
| Condense Data |
| Configure Actions |
| Configure Unity™ Interlaboratory Report Frequency |
| Configure UnityWeb™ |
| Configure UnityWeb™ |
| Configure Westgard Advisor™ online |
| Configuring the TEa for All Analytes |
| Configuring the TEa for an Analyte |
| consensus group |
| Consensus Groups |
| Consensus Groups |
| Considering Common Factors on Multitest Systems |
| Contact Bio-Rad |
| Creat a Multi-LJ Chart |
| Create a Bar Chart |
| Create a Data Review Report |
| Create a Levey-Jennings Chart |
| Create a Listings Report |
| Create a Panel and Add Tests |
| Create a Point Data Report |
| Create a Statistical Report |
| Create a Summary Data Report |
| Create a Supervisor’s Report |
| Create a Youden Chart |
| Create an Audit Trail Report |
| Create an Operator Report |
| cumulative mean |
| Current Lab, Panel, Lot, and Test |
| CV (coefficient of variation) |
| CVR (coefficient of variation ratio) |
| D |
| D |
| Data Entry Configuration |
| Data Entry Features |
| Data Entry Grid |
| Data Entry Permissions |
| data group |
| Data Groups |
| Data Handling Permissions |
| Data Permissions |
| Data Rejection Report |
| Data Rejection Report |
| Data Requirements |
| Data Review Permissions |
| Data Review Report |
| Database Basics |
| Database Permissions |
| Define or Edit a Group |
| Define, Modify, and Delete Users |
| Delete a Panel |
| Delete a Range of Data |
| Delete a Range of Data |
| Delete a Row of Data from the Data Entry dialog box |
| Delete a Test |
| Delete a User |
| Delete Data |
| Delete Historical Suggestions |
| Delete Lab Numbers |
| Delete Lot Numbers |
| Delete Tests |
| Determine Quality Requirements for the Test |
| Determining an Acceptable CV |
| Determining the Type of Error |
| Direct Methods of Adding Tests |
| Document Report Reviews |
| Documenting the Review |
| Download Adobe® Reader® |
| Duplicate a Bio-Rad Lot Number |
| Duplicate a Lab Number |
| Duplicate a Non-Bio-Rad Lot Number |
| Duplicate Lots |
| Duplicate Tests |
| E |
| E |
| Edit action log |
| Edit all data |
| Edit Data |
| Edit Data, Date, and Time |
| Edit last line |
| Edit Lot Numbers |
| Edit setup options |
| Edit the Date and Time |
| Editing a Bio-Rad Lot |
| Editing a Non-Bio-Rad Lot |
| Editing Grid Lines and Color |
| Enter Data |
| Enter Multi Test Data |
| Enter new data only |
| Enter Qualitative Data |
| Enter Single Test Point Data |
| Enter Single Test Summary Data |
| Essential Startup Tasks for New Users |
| Evaluate Test Performance |
| evaluation mean/SD |
| Example Affiliated Data Exception Report |
| Example Affiliated Laboratory Comparison Report |
| Example Bias and Imprecision Histogram Report |
| Example Data Rejection Report |
| Example Laboratory Comparison Report |
| Example Laboratory Comparison Report: Abbreviated Summary |
| Example Laboratory Histogram Report |
| Example Laboratory Performance Overview Report |
| Example Lists |
| Example Manufacturer Report |
| Example Monthly Evaluation Report |
| Example of a Chart Header |
| Example of Group Statistics |
| Example of Summary Statistics |
| Example of the Navigation Tree |
| Example Worldwide Report |
| Export Data |
| Export Data |
| F |
| F |
| Fill background |
| First Time Log In |
| First Time Log In |
| Fixed Mean and SD |
| Fixed Mean/Fixed SD |
| Fixed Mean/Floating SD |
| Fixed Statistics |
| Fixed Statistics |
| floating mean |
| Floating Mean/Fixed SD |
| Floating Mean/Floating SD |
| Frequency Histograms |
| Functions and Where to Find Them |
| G |
| General Chart Options |
| Generate Rules with Westgard Advisor™ online |
| Getting Started |
| Glossary |
| Good Laboratory Habits |
| Grid Display Options |
| Grid Lines and Color |
| Group Login ID and Password |
| Group Statistics |
| H |
| How Are QC Results Used? |
| How to Interpret an OPSpecs Chart |
| How to Use the Levey-Jennings Chart |
| How to Use the Youden Chart |
| I |
| I |
| Identify Appropriate QC Materials |
| Identify Possible QC Procedures |
| Important Facts |
| imprecision |
| inactive rule |
| Indirect Methods of Adding Tests |
| Insert a Data Row |
| Insert Data |
| InstantQC™ |
| InstantQC™ |
| InstantQC™ Chart |
| InstantQC™ Chart |
| InstantQC™ Report |
| InstantQC™ Reports |
| InstantQC™ Reports and Charts |
| InstantQC™ Reports and Charts |
| interlaboratory |
| intralaboratory |
| Introduction to Quality Control Statistics |
| ISO 15189 Requirements |
| Issues to Consider |
| Items Automatically Duplicated |
| K |
| Keys to a Productive Review of the Laboratory Quality System |
| L |
| L |
| Lab, Panel, Lot, and Test Information |
| Laboratory 2SD and 3SD Ranges |
| Laboratory Comparison Report |
| Laboratory Comparison Report |
| Laboratory Histogram Report |
| Laboratory Histogram Report |
| Laboratory Performance Overview Report |
| Laboratory Performance Overview Report |
| Labs |
| Labs and Lots |
| Labs, Lot, Tests, and Panels Permissions |
| level |
| levels in use |
| Levey-Jennings Chart |
| Levey-Jennings Chart |
| Levey-Jennings Chart Legend |
| License Agreement |
| License Agreement, Warranty Information, and Trademark Notices |
| Limitations of Instrument Setup |
| Limits for the CV |
| Limits for the Mean |
| Links |
| Listings Report Options |
| Listings Reports |
| Lists |
| Log Off the Software |
| Log On to the Software |
| Lot Expiration Notifications |
| Lots |
| M |
| M |
| Manage Data |
| Manage labs/lots/tests |
| Manage panels |
| Manage users |
| Managing Columns |
| Manufacturer Report |
| Manufacturer Report |
| master lot number |
| matrix |
| maximum QC |
| Mean |
| Mean |
| median |
| Menu Items |
| method |
| method group |
| Microscopy Section |
| Modify a User |
| Monthly Evaluation Report |
| Monthly Evaluation Report |
| Monthly Reports |
| Monthly Reports |
| Multi Test Data Entry |
| Multi Test Data Entry Grid |
| Multi Test Data Entry Information |
| Multi-LJ Chart |
| N |
| Navigate the Single Test Data Entry Dialog Boxes |
| Normal and Abnormal Controls |
| Notes About Rule Evaluation |
| Notifications |
| N-x Rules |
| O |
| O |
| Open a Closed Lot |
| Open a Lab Number |
| Open a Test |
| Open and Close Lab Numbers |
| operating point |
| Operator Report |
| Operator Report Options |
| Operator Setup |
| Operator Setup |
| Operator Setup Shifts |
| OPSpecs (operational process specifications) Chart |
| OPSpecs Chart |
| OPSpecs Chart Components |
| Optional Items When Duplicating |
| Optional Reports |
| Optional Reports |
| Options |
| Organization of this Guide |
| Other Options |
| Other Options |
| Overview |
| Overview |
| Overview of Groups |
| Overview of Rule Evaluation |
| Overview of the Single Test Data Entry Dialog Boxes |
| P |
| P |
| Paging Arrows |
| panel |
| Panels |
| Panels and Data Groups |
| Password Expiration |
| Password Requirements |
| Passwords |
| peer group |
| percent AQA (SE) |
| Percentile Distribution Table |
| Perform Bench Review |
| point data |
| Point Data Report |
| Point Data Report Options |
| precision |
| Predict the Performance of the QC Procedures |
| Primary Lab Number |
| Print Reports |
| Print the Westgard Advisor™ online Report |
| probability of false rejection (P-fr) |
| Program and Database Basics |
| Program Hints |
| Q |
| Q |
| QC (quality control) |
| QC Configuration |
| Qualitative Data Entry |
| Qualitative Evaluation of a Test's Bias and Imprecision |
| R |
| R |
| R-4s |
| random error |
| range |
| Recommended Steps |
| Reconcile Data |
| Reconcile Data |
| References |
| Regular Log On and Log Off Process |
| Regulatory Requirements and Reports |
| Rejection Log Messages |
| rejection rule |
| Relating the Error to Possible Causes |
| Relating the Problem to Recent Changes |
| Remove Tests from a Panel |
| Rename a Panel |
| Require Audit Trail Comments |
| Returning TEa Selections to the Default |
| Review and Annotate Data |
| Reviewing Data |
| Rule Status |
| Rules and Settings Permissions |
| run |
| S |
| S |
| Save and Print Charts |
| Save and Print Reports |
| Save and Transmit |
| Save Reports |
| Scroll Bars and Scroll Arrows |
| SD (standard deviation) |
| SDI (standard deviation index) |
| Select a QC Procedure |
| Select Bar Chart Options |
| Select Levey-Jennings Chart Options |
| Select Multi-LJ Chart Options |
| Select SPC Rules |
| Select Test Settings |
| Select Youden Chart Options |
| Selecting a Data Set |
| Selecting Chart Header Options |
| Selecting Fill Background |
| Selecting Grid Display Options |
| Send Data to the Unity™ Interlaboratory Program |
| Send Qualitative Data to the Unity™ Interlaboratory Program |
| Set a Password Expiration |
| Set SPC Rules |
| Set Up User Permissions |
| Setting a Fixed Mean and/or Fixed SD |
| Setting Floating Statistics as a Fixed Mean and/or Fixed SD |
| Setting SPC Rules at the Lot Level |
| Setting SPC Rules at the Test Level |
| shift |
| Single Test Point Data Entry |
| Single Test Point Data Entry Grid |
| Single Test Summary Data Entry |
| Six Sigma |
| Sort Panel Names |
| Sort Tests |
| Sort Tests for a Lab Number |
| Sort Tests in a Panel |
| Sort Tests in a Panel |
| SPC (statistical process control) rules |
| SPC Rules |
| SPC Rules Precedence When Showing Rule Violations |
| SPC Rules: Tabular Summary |
| Specify a Fixed Mean and SD |
| Specifying Data Requirements |
| Standard Deviation (SD) |
| Standard Deviation Index (SDI) |
| Statistical Profile Report |
| Statistical Profile Report |
| Statistical Report |
| Statistical Report Options |
| Submit Data from the Bench Review |
| Submit Data Manually |
| Submit Data Monthly |
| summary data |
| Summary Data Entry Grid |
| Summary Data Report |
| Summary Data Report Options |
| Summary Statistics |
| Summary Statistics |
| Supervisor's Report |
| Supervisor's Report Options |
| Supplemental Information |
| suspect data |
| System Requirements |
| systematic error |
| T |
| T |
| Tabs |
| TE (total error) |
| TEa (total allowable error) |
| Test Rules and Settings |
| Tests |
| Total Allowable Error (TEa) Options |
| Total Error (TE) and Total Allowable Error (TEa) |
| Trademark Notices |
| Transmission |
| trend |
| Troubleshoot QC Results |
| Types of Lab Numbers |
| Typographical Styles and Conventions |
| U |
| U |
| Unavailable Items |
| Understand the Navigation Tree |
| Unity™ Interlaboratory Reports |
| UnityWeb™ Charts |
| UnityWeb™ Reports |
| UnityWeb™ Tabs and Functions |
| UnityWeb™ User Guide |
| Update a Test |
| Update Lab Number Information |
| Update Tests |
| Update the License |
| Update the License via an XML File |
| Update the License via the Internet |
| Update the VITROS® Slide Generation Number |
| Upgrade to UnityWeb™ |
| Urinalysis Report |
| Urinalysis Report |
| Use a Fixed Mean and Fixed SD with SPC Rules |
| Use a Fixed Mean and SD |
| Use the Advanced Option |
| Use the Set Date Feature |
| Use the Westgard Advisor™ online Defaults |
| Use the Westgard Advisor™ online Wizard |
| Useful Facts about Fixed Mean and Fixed SD |
| Useful Statistics |
| User Permissions |
| User Profiles and Security |
| Using Six Sigma |
| Using This Report |
| Using This Report |
| V |
| Verifying and Documenting |
| View a Levey-Jennings Chart |
| View Actions |
| View and Print Interlaboratory Reports |
| View data only |
| View Database Information |
| View Existing QC Rules |
| View Lab Data and Group Statistics |
| View Rules and Settings |
| Viewing Comments |
| Viewing InstantQC™ Reports |
| Viewing TEa Details |
| VITROS® Slide Generation Numbers |
| W |
| W |
| warn rule |
| Warranty Information |
| Welcome |
| Westgard Advisor™ online |
| Westgard Advisor™ online Report |
| Westgard rules |
| What is Quality Control? |
| When Westgard Advisor™ Recommends a Maximum QC Procedure |
| Worldwide Report |
| Worldwide Report |
| Y |
| Youden Chart |
| Z |
| Z |
| z-score |
| z-score |