Add Tests with a Code of “Other”

Note: Unity™ Interlaboratory Reports are not available for tests using a test code of Other. Bio-Rad recommends using Other only on a temporary basis until the appropriate analyte, instrument, reagent, method, unit, or temperature is added to the code list. Contact your Bio-Rad QC Program Representative to have codes added to the code list.

1. Log in as a user with the Manage labs/lots/tests permission.
2. Click the Configure tab.
3. Click Test.
4. If you have more than one lab number, make sure the correct number appears in the Lab number list.
5. Select the appropriate lot from the Lot list.
6. Select a test parameter from each of the respective lists in the Test information section or select Other for any code that does not appear.
7. Click Add.

   The Other dialog box appears.

8. Enter the test description in the corresponding fields.
9. Click OK.

   The new test appears at the bottom of the Open tests list.