Add Tests Using Instrument Setup

Note: Tests previously defined for the instrument in the lab/lot combination are omitted from the list.

1. Log in as a user with the Manage labs/lots/tests permission.
2. Click the Configure tab.
3. Click Test.
4. If you have more than one lab number, make sure the correct number appears in the Lab number list.
5. Select the appropriate lot in the Lots list.
6. Click Inst. Setup.
7. Select the instrument in the Instrument list. Use the scroll arrows to move up and down the list as necessary.

   A list appears with all available tests for the instrument and lot combination according to the Unity™ Method Guide for Selected Instruments.

   Note: A message appears if no tests are available for the instrument and lot combination.

   By default, all tests have a check mark and are selected. It may be necessary to scroll to the bottom of the window to see all information.

8. By default, Conventional unit is selected. Select the SI option for SI units.
9. Select and clear the check boxes so only the tests to add are selected.

   Tip: The Select None button clears all the check boxes. The Select All button selects all the check boxes.

10. For VITROS® instruments only, enter the slide generation number in each of the SG fields.
11. Click OK.

    The new tests appear in the Open tests list.