Update the VITROS® Slide Generation Number

When updating the VITROS® slide generation number, UnityWeb™ only updates the slide generation number for the selected test. New tests are not created and the existing test remains available for data entry, reports, and so on.

When correcting a slide generation number, update the test rather than change the slide generation number. If a slide generation number is not correct and you have already entered data for the test, updating the test corrects the problem in UnityWeb™. Also, the test is updated in the Unity™ Interlaboratory Program the next time you transmit data.

Note: Update the slide generation number after using the Instrument Setup feature, which assigns slide generation number 1 to each test created.

Follow this procedure to correct a slide generation number or if you used the Instrument Setup feature and need to update the slide generation number.

1. Log in as a user with the Manage labs/lots/tests permission.
2. Click the Configure tab.
3. Click Test.
4. Select the lab from the Lab list.
5. Select the lot from the Lot list.
6. Select the test with the slide generation number to update in the Open tests list.
7. Enter the new slide generation number in the VITROS® slide generation number field.
8. Click Update.